Hinge Components

Detent Hinge with or without damper

Formally Item Number CSH-63
Detent hinge with built-in damper as an option
Detent will hold lid in open/closed position without secondary support, and optional damper will provide soft closing
Operating angle: 100 degrees
(detent at both 0 and 100 degrees
Detent holding force: 10.2 kgf-cm(8.8 lbs-in)
Damper torque range: 10.2 ~25.5 kgf-cm(9~22 lbs-in)

Stainless Steel Torque Hinge / Friction Hinge

Formally Item Number IT-S/M
Designed for holding monitors, displays etc. in position

Soft-Close Dampening Hinge

Formally Item Number JH-25/35
Soft-close damper keeps lid from slamming shut
Operating Temperature: 0~40C (32~104F)
Operating angle: 115 degrees / Dead angle 0
A-type damper: Damper works counterclockwise
B-type damper: Damper works clockwise
Sold per pair(Each of A/B type

LIFT ASSIST HINGE

Formally Item Number JH-210
Assists in opening doors
Built-in UDH damper works to absorb slamming
Successfully pass 30,000 cycle test.
Maximum torque:210 kgf-cm(2058 N-cm)
Application: Hatch doors, commercial freezers, etc.

SOFT-CLOSE DAMPENING HINGE

Hinge with built in damper to keep lids from slamming shut.
Mortise mount type.
Ideal for small size lid.
Sold in pairs.
Torque Calculation:
Torque = Door Height x 1/2 x Door Weight
*Please see diagram below for applicable torque moment.
*Please specify face plate color when ordering.
Please install Left and Right brackets on correct side.

Soft-Close Dampening Hinge

Hinge with damper built-in to keep lid from slamming shut
Mortise mount type
Ideal for small size lid
Sold in pairs
Torque calculation: Torque = Door Height x 1/2 x Door Weight

Soft-Close Dampening Hinge

Formally Item Number JH-W
Soft-close damper keeps lid from slamming shut
Operating Temperature: 0~40C (32~104F)
Operating angle: 115 degrees / Dead angle 0

Stainless Steel Spring Loaded Pivot Hinge

Formally Item Number PV-60AC
Spring loaded for self closing
Lift pin for easy installation and removal
Torsion moment (hinge closed):
0.76 kgf-cm (0.66 lb-in) per piece
Application: Sheet metal cabinetry

Dual AXIS Torque Hinge

Provides torque stability in both directions.
Twin Axis-free stop at any angle in tilt & swivel.
Suitable for monitor screens.

TORQUE HINGE

Hinge with friction torque for holding lid/door in position

TORQUE HINGE

Hinge with friction torque for holding lid/door in position

Torque Hinge

Stainless steel material ideal for harsh environments.
Best durability on continuous open/close cycle.
Free stop between 0 ~ 180 degrees.

DETENT HINGE

Formally Item Number YC-105
Material: 304 Stainless Steel
Finish: Polished
Holds doors open without secondary support
Easy installation
Application: Control box, food equipment, outdoor use, trunk etc.
Retaining force: 10 lbs.inch

Hinge(with catch)

Formally Item Number YJ-50
Plastic hinge holds doors at 4 different positions without secondary support.
Holds at 4 positions, 90º each.
Light weight and easy to install
Application: Medical equipment, food equipment, automation machine etc.

Cell Phone Hinge

Ultra compact detent hinge ideal for clamshell type cell phone, PDA and other foldable devices
Designed for 160 degree opening
Detent catch in open and closed position
Friction torque moment provided to lightly hold device in any angle
Easy snap-in for quick assembly
Unhanded for easy manufacturing process
Passed 100,000 open/close cycle test
Applications:
-Cell phone
-PDA
-Head set
-Gaming device
-Webcam

Stainless Steel Torque Hinge / Friction Hinge

Constant torque friction hinges are designed for holding doors in position throughout their full range of motion
Stainless steel construction for corrosive environments
Operating temperature: -20 C ~ 60 C(-4 F ~ 140 F)

Torque Hinge

Hinge with friction torque for holding monitors, displays, lids etc in position.
Plastic cover provided for clean appearance.
Recommended for use in pairs.
Lubricant should not be applied on hinge.