Lid Support Components

LAPCON HORIZONTAL BI-FOLDING DOOR MECHANISM

For Kitchen cabinets, Bed room cabinet
Color: Black (BLK, White (WHT)
Width, 600 ~ 900mm (23-5/8"~35-7/16") Height, 270~360mm (10-5/8"~14-11/64")/each door Weight, 2.5~5.5 kg(5.5 kg(5.5~12.1lbs)/each door

HORIZONTAL BI-FOLDING DOOR MECHANISM

Material: Plastic, Steel
Finish: Nickel
Color: Light Grey
Supplied with 3.5x15 screws
HBFN unique new bi-fold mechanism will assist the door open and close in a smooth motion
More compact design requires no tracks or guides
Handle can be put at a lower position
Patented LAPCON technology lets the movement glide smoothly and quietly
Must be ordered with the HBFN-SZ mounting plate for installation

LAPCON HEAVY-DUTY SOFT-DOWN STAY

For Bureaus, Writing desk. Color: Black (BLK), White (WHT) Supplied with screws (3.5x15) Check the torque moment of your flap or lid by using the following formula:
Flap Height (cm)x1/2xWeight (kg)=Torque Moment (kg.cm/pair)

LAPCON HEAVY-DUTY SOFT-DOWN STAY

For Stereo Cover, Toy Box Color: Black (BLK), White (WHT) Supplied with screws (3.5x15) Check the torque moment of your flap or lid by using the following formula:
Flap Height (cm)x1/2xWeight (kg)=Torque Moment (kg.cm/pair)

LAPCON HEAVY-DUTY SOFT-DOWN STAY

For Kitchen cabinets, Bed room cabinet Color: Black (BLK, White (WHT) Supplied with screws (3.5x15) Check the torque moment of your flap or lid by using the following formula:
Flap Height (cm)x1/2xWeight (kg)=Torque Moment (kg.cm/pair)

Heavy Duty Soft-Down Stay

Designed to keep Top-Hinged door open and from slamming down.
For top-hinged door with concealed hinges
Used in pairs
Designed to hold doors in closed and opened position
Arm mounting plate sold separately
Torque calculation:
torque = Door Height x 1/2 x Door Weight
K-type(Light Duty): 140~189kg.cm (122~164 lbs.inch)/Pair
M-type(MediumDuty): 190~229kg.cm (165~199 lbs.inch)/Pair
H-type(Light Duty): 230~269kg.cm (200~234 lbs.inch)/Pair
S-type(Light Duty): 270~300kg.cm (235~260 lbs.inch)/Pair

Lateral Opening Door System

• Innovative laterally swinging hinges allow door to swing open in asmall radius
• Ideal for locations with limited space in front of cabinetry such as entryways, hallways, kitchens, etc., maximizing space available
• Can be installed flush with the surrounding cabinetry or wall
• Hinge allows door to freely stop in any opened position.
• Damper function produces soft, self-closing movement.
• Hardware does not require hardware (rails, etc.) on floor or ceiling of cabinetry.
• Designed for standard 32mm system mounting for easy installation.
• Use standard sets for basic installation; components for custom installations also available.

• Residential: kitchens, hallways, laundry rooms
• Commercial: prep or gift-wrap stations, information booths
• Industrial: workbenches, locker rooms

LAPCON SOFT-DOWN STAY

For use with downward-opening flaps (bureaus, wine glass cabinets). Check the torque moment of your flap or lid. One NSD Door height (cm)x1/2xDoor Weight (kg)=20~7o kg.cm Two NSD Door Height (cm)x1/2xDoor Weight (kg)=40~140 kg.cm Supplied with screws (35x15)

LAPCON SOFT-DOWN STAY

For use with upward-opening lids (like a stereo cover) 70° open. For use with upward-opening lids (like a vanity with mirror) 105° open. Check the torque moment of your lid or flap. One NSD Door Height (cm)x1/2xDoor Weight (kg)=20~70 kg.cm Two NSD Door Height (cm)x1/2xDoor Weight (kg)=140 kg.cm

LAPCON SOFT-DOWN STAY

For use with upward-opening flaps (like those in upper kitchen cabinets) 80°/90°/100° open (by sliding in oblong slots) Check the torque moment of your flap or lid. One NSD Dorr Height (cm)x1/2xDoor Weight (kg)=20~70 kg.cm Two NSD Door Height (cm)x1/2xDoor Weight (kg)=40~140 kg.cm

Adjustable Soft Down Stay

For downward opening flap door with piano, butt or drop hinges
NSDX-10 is designed to hold door in closed position.
Speed adjustment screw located on front for easy adjustment
Torque calculation:
Torque= Door height x 1/2 x Door weight
Per piece:20 ~ 70 kg.cm (19 ~ 60 lbs.inch
Per pair: 40 ~ 140 kg.cm (38 ~ 120 lbs.inch)

Adjustable Soft Down Stay

For top opening flap door with piano, butt or concealed hinges
NSDX-20 is designed to hold door in fully opened position.
Speed adjustment screw located on front for easy adjustment
Torque calculation:
Torque= Door height x 1/2 x Door weight
Per piece:20 ~ 70 kg.cm (19 ~ 60 lbs.inch
Per pair: 40 ~ 140 kg.cm (38 ~ 120 lbs.inch)

Adjustable Soft Down Stay

For upward opening flap door with piano, butt or concealed hinges
NSDX-35 is designed to hold door in fully opened position.
Speed adjustment screw located on front for easy adjustment
Torque calculation:
Torque= Door height x 1/2 x Door weight
Per piece:20 ~ 70 kg.cm (19 ~ 60 lbs.inch
Per pair: 40 ~ 140 kg.cm (38 ~ 120 lbs.inch)

Spring Loaded Lid Stay

Heavy Duty Spring Loaded Stay - Side mount
Spring mechanism assists lifting door and holds in open position
Non-handed
Stainless steel body, steel spring

Heavy Duty Spring Loaded Stay - Back panel mount

Spring mechanism assists lifting door and holds in open position
Non-handed
Stainless steel body, steel spring
For sidel mount, choose S-AT

Soft-Down Stay (Short-Arm)

For downward opening flap door with piano, butt or drop hinges
Short arm type designed for small height door applications
SDS-C100TV has a catch to hold the lid in closed position.
SDS-100TV does not have a catch feature. Designed to be used with a magnetic catch or touch latch.
Non-handed
Torque calculation:
Torque= Door height x 1/2 x Door weight
Per piece: 0.5 ~ 12.0 kg.cm (0.45 ~ 10.4 lbs.inch
Per pair: 10.0 ~ 24.0 kg.cm (8.7 ~ 20.1 lbs.inch)

SOFT-DOWN STAY

For use with upward-opening flaps (vanity lid, toy box) that open to a 105° angle. Supplied with screws (3.5x14) Torque moment formulas: One SDS Door Height (cm)x1/2xDoor Weight (kg)=35 ~ 50 kg.cm Two SDS Door Height (cm) x 1/2 x Door Weight (kg) = 70 ~ 100 kg.cm Recommended door thickness 20mm (25/32")
Lapcon Selector - Torque Calculator
Soft Down Stay Selection Table

SOFT-DOWN STAY

Face plate for glass door
For use with SDS

SOFT-DOWN STAY

For use with downward-opening flaps (bureaus).
The SDS-C100 (with catch) is designed to securely latch a flap.
Supplied with screws (3.5x14)
Torque moment formulas:
One SDS Door Height (cm)x1/2xDoor Weight (kg)=35 ~ 50 kg.cm
Two SDS Door Height (cm) x 1/2 x Door Weight (kg) = 70 ~ 100 kg.cm
Recommended door thickness 20mm (25/32")

SOFT-DOWN STAY

For Upward and Top-Opening flap with concealed or single knuckle hinges.
Material: Plastic, Steel, Zinc Alloy
Finish: Nickel
Supplied with screws(3.5 x 14)
SDS-C301N is designed to securely latch a flap closed and hold the flap in the fully opened

Torque Calculation: Torque = Door Height x 1/2 x Door Weight

Torque per piece : 40~70kg.cm (35~60 lbs.inch)

Per Pair : 80~140 kg.cm (70~120 lbs.inch)

SOFT-CLOSING LID-STAYS

Lapcon stay for upward-opening flap doors
Lift-assist mechanism for extra light-opening
Door stays in any desired position
Damper equipped for soft & silent closing at the end
Slim design and installed location maximizes space inside of cabinet
Simple installation by aligning body to edge of cabinet
Single or pair use allows wide range of door size / weight
Torque Calculation:Door Height x 1/2 x Door Weight
M type: 55 ~ 75kg·cm (48 ~ 65lbs·in) per piece
H type: 75 ~ 100kg·cm (65 ~ 87lbs·in) per piece
*See below for weight range

LAPCON VERTICAL SWING LIFT-UP MECHANISM

Recommended Door Size and Weight: For doors: Width, 600~900 mm (23-5/8"~35-7/16") Height, 390~450mm(15-23/64"~17-23/32")/each door Weight, 2.5~5.2 kg(5.5~11.4lbs)/each door